Parts Requirements for Wireless ECE Bot

Index of parts used in the project with more information available on each one.

A good flowchart of our project would be helpful.
Wifi Project Flowchart

	EZL-80 PCMCIA-TTL interface The EZL-80 device is made by Sollae, a European company. We were able to deal with a United States reseller - Data Flow Systems. This device runs on 3.3V and draws 10 mA of current. The serial level is TTL and it supports a wide range of data transfer protocols, including UDP, TCP, and IP >> more information on the EZL-80 device
	CSM12C32 Module It has been in the plans of the EE Curriculum to use this device. >> more information
	CAN (Controller Area Network) A controller area network will be used to communicate between the robot and CSM Module. This will enable the project to go forward without worry about the availability of pinout in the future because of any one project. >> The CAN standard by Bosch >> One of many introductions to CAN >> PDF-MCP2551 Datasheet (CAN Transceiver) by Microchip >> PDF-Freescale's MSCAN Block Guide (very helpful in programming)